M&D Store |
Roman Blinds - Rotary Chain, Corded and Motorised |
Deluxe-3 Rotary Chain System |
Deluxe-3 Rotary Chain Roman Blind Kits |
Deluxe-3 Rotary Chain Roman Blind Kit 60cm wide |
Deluxe-3 Roman Blind Kit 60cm
Shown here withoptional 1:4 ratio heavy duty chain drive with child safety breakaway and chrome bead chain.
OUT OF STOCK
The standard headrail is supplied with a 1:1 ratio chain drive suitable for blind weights of up to 3.5kg and a 350cm (175cm drop) white nylon chain with a child safety breakaway device which also allows you to shorten the chain ring if necessary. The chain drive is supplied fitted on the right of the headrail but can easily be moved to the left if required. The bottom of the chain must be no lower than 60cm from the floor.
Profile Height: 38mm
Profile Depth: 36mm
Bracket projection: 41mm to front of headrail.
Optional Brass bead chains are available in brass, chrome, nickel, gold, antique silver, antique brass and black nickel finish.
After adding the headrail to basket click OPTION 1 from the Brass Bead Chain Options below.
(4 or less)
(5 or more)
For heavier blind weights up to 7.5kg upgrade the standard 1:1 ratio chain drive to a 1:4 ratio heavy duty chain drive with or without an integrated Child safety breakaway. You MUST use a continuous chain ring with these heavy duty chain drives.
Additional charge £4.48+VAT. Requires a continuous chain ring no lower than 60cm from the floor.After adding the headrail to basket click OPTION 2 from the Brass Bead Chain Options below.
Additional charge £2.00+VAT. Requires a continuous chain ring fitted with a chain tensioner screwed to the wall no lower than 150cm from the floor. After adding the headrail to basket click OPTION 3 from the Brass Bead Chain Options below.
All of our Roman Blind systems are supplied with the chain drive mounted on the right hand side of the headrail. If you would prefer that it is mounted on the left hand side then please tick the following box.
We offer a FREE cutting service on this kit.Simply tick this box and enter the required lengths in mm.
Now, please enter the lengths required in mm.
Your measurements for the headrail length will include the drive and endcap.
You should also enter the required length for the flat bottom bar and fibreglass rods including end caps.
Fibreglass rods are normally 30-50mm less than the headrail to allow for the fabric side turning.
If you do not enter measurements then the items ordered will be supplied un-cut.
Deluxe-3 Roman Blind Kit 120cm
Deluxe-3 Roman Blind Kit 180cm
WHITE - 250g/m2 Sarille synthetic stitch-bond heat-set interlining, 137cm (54") wide
Nickel finish brass bead chain for chain drives
UK MainlandSubsidised deliveryonly £8.30 +vatFor next-working-day service*
How we calculate delivery changes
Call us on
Fax: 01652 648104
Merrick & Day Ltd
© 2014 - 2020 Merrick & Day Ltd