1. Home
  2. Delivery Info

All prices are exclusive of VAT

Satin nickel finish solid brass cleat hooks with screws

Satin nickel finish solid brass cleat hooks with screws

Ref: CLEATSN

You must install the cleats no lower than 1.5 metres to the floor and the cleat must be able to take all of the cord when the blind is in the fully raised position. If one cleat cannot take all of the cord install two cleats, one above the other, approximately 15cm apart or sufficiently apart to ensure that all of the cord can be accumulated on the cleats and no part of the cord or acorn is lower than 1.5 metres to the floor.
Length 75cm (3").

Price each:

(19 or less)£1.37 +VAT
(20 or more)£1.07 +VAT

People who bought this also bought:

White flat aluminium bottom bar. 25mm wide. 2.99 metre lengths

White flat aluminium bottom bar. 25mm wide. 2.99 metre lengths

(4 or fewer)£6.34 +VAT
(5 to 29)£5.08 +VAT
(30 or more)£4.55 +VAT
Sew on adjustable orb for cord or tape

Sew on adjustable orb for cord or tape

(99 or fewer)£0.27 +VAT
(100 or more)£0.23 +VAT
20mm (3/4in) loop tape, sew-in, White

20mm (3/4in) loop tape, sew-in, White

(24 or fewer)£0.28 +VAT
(25 or more)£0.22 +VAT
White braided blind cord 1.2mm - 100m roll

White braided blind cord 1.2mm - 100m roll

(2 or fewer)£6.24 +VAT
(3 or more)£4.87 +VAT

Recently Viewed